Refine by
Cryogenic Liquid Equipment & Supplies
27 equipment items found
Manufactured by:MVE Biological Solutions based inBall Ground, GEORGIA (US) (USA)
Lab Series Cryogenic Liquid Dewars Used in Laboratories and Medical Facilities Worldwide to Store Liquid Nitrogen. These high efficiency, super insulated dewars are the most convenient, economical way to store and dispense liquid nitrogen. Many lab units can be fitted with pouring spouts, pressurized dispensing devices or dippers ...
Manufactured by:Tempshield Inc based inMount Desert, MAINE (USA)
Splash Protection When Using Cryogenic Liquids. The injection molded polycarbonate clear shield is shaped to hug your chest and side of your face when in use, and pivots up and out of the way when your task is done. ...
Manufactured by:Hubei Qixing Group based inSuizhou, CHINA
The cryogenic semi-trailer tanker mainly consists of horizontal storage tank, half trailer chassis, operation box, cryogenic liquid pump, automatic compressor, flow hose and connection ...
Manufactured by:Cryofab based inKenilworth, NEW JERSEY (USA)
The CH Series cryogenic storage tank is intended for low-pressure inter-facility transport and storage of liquid nitrogen, oxygen, and argon. Convenient Access to Cryogenic Liquids. These tanks feature a horizontal design, so even vessels with a capacity of 2000 liters have access points at an easy-to-reach height. This makes CH ...
Manufactured by:Hubei Qixing Group based inSuizhou, CHINA
The liquid oxygen storage tank is a double-layer fixed vacuum powder insulated storage tank (storage tank). The inner material is made of 304 stainless steel, and the outer container is made of Q345R or 16MnDR. The surface anti-corrosion coating adopts the processes of sand blasting, rusting, purging, spraying, etc., and adopts a two-component fast curing liquid ...
Manufactured by:Ability Engineering Technology, Inc. based inSouth Holland, ILLINOIS (USA)
Vacuum Jacketed Transfer Lines (6″+) AET Designs and Manufactures vacuum jacketed transfer lines for the cryogenic industry. This application is utilized to transfer gases/liquids with a low boiling point while shielding them from atmospheric interference. These piping assemblies can also include Flex Segments to help with customer connection point ...
Manufactured by:Ability Engineering Technology, Inc. based inSouth Holland, ILLINOIS (USA)
AET Designs and Manufactures vacuum jacketed transfer lines for the cryogenic industry. This application is utilized to transfer gases/liquids with a low boiling point while shielding them from atmospheric interference. These piping assemblies can also include Flex Segments to help with customer connection point alignment.Transferring cryogenic ...
Manufactured by:Oxywise s.r.o. based inPieštany, SLOVAKIA
Produce gaseous oxygen from compressed air on site and offer a cost-effective, reliable and safe alternative to traditional oxygen gas supplies such as cylinders or cryogenic liquid. Our design is made for round the clock 24/7 operation. Each generator is equipped with automatic start&stop function, enabling the generator to start and stop automatically ...
Manufactured by:Cryogas Equipment Pvt. Ltd based inDist. Vadodara, INDIA
Vacuum Insulated Cryogenic Storage Tanks and Cold Converter tanks are double walled tanks designed for efficient storage of LOX, LIN, LAR, LNG, LCO2 and other Cryogenic Liquids. Standard range of CRYOGAS make Cryogenic Storage Tanks are available from 3,000 to 2,56,000 Litre with operating pressure range of 10,18,24 and 37 ...
Manufactured by:Oxywise s.r.o. based inPieštany, SLOVAKIA
Produce gaseous oxygen from compressed air on site and offer a cost-effective, reliable and safe alternative to traditional oxygen gas supplies such as cylinders or cryogenic liquid. Our design is made for round the clock 24/7 operation. Each generator is equipped with automatic start&stop function, enabling the generator to start and stop automatically ...
Manufactured by:attocube systems AG based inHaar, GERMANY
attocube‘s attoLIQUID2000 superconducting magnet system is based on highly efficient liquid Helium bath cryostats with 50 l cryogenic liquid reservoir, but also includes a variable temperature insert (VTI) for convenient temperature control in the range between 1.8 K and 300 K. The system includes all necessary components needed for the ...
Manufactured by:attocube systems AG based inHaar, GERMANY
attocube‘s attoLIQUID1000 liquid helium cryostat is based on highly efficient liquid Helium bath cryostats with 50 l cryogenic liquid reservoir. As with the whole attoLIQUID family, the attoLIQUID1000 has been optimized for highest stability, enabling experiments such as ultra high resolution imaging and/or spectroscopy ...
Manufactured by:ZA.VE.RO. Industrial Valves based inRomagnano Sesia, ITALY
Cryogenic valves are designed to operate at temperature down to -196°C.All metallic parts are manufactured in stainless set, while the soft parts are realized in proper special materials suitable for this so severe application. Normally, the seats are in poliChloro-Tri-Fluoro-Ethylene (PCTFE-Kel-F®) and PTFE lip seals insures the sealing of all dynamic ...
Manufactured by:Didion Separator based inBellevue, OHIO (USA)
Didion Vessel has many years of experience in the design and manufacture of ASME certified cryogenic pressure vessels, such as storage tanks for liquid nitrogen, oxygen, and LNG. We have built many of these for NASA and others throughout the years. The testing rules become much more rigorous at temps below -320° F, as outlined by the ASME Section VIII Div I, ...
Manufactured by:MR Solutions based inGuildford, UNITED KINGDOM
The MRS*PET INSERT, designed by MR Solutions, facilitates simultaneous PET/MR imaging, enabling the acquisition of multi-parametric information from the same subject with precision. Built to integrate seamlessly with cryogen-free MR systems up to 9.4 Tesla, it offers flexibility in research settings due to its removable nature. This product can function independently of the MR ...
Manufactured by:Cryofab based inKenilworth, NEW JERSEY (USA)
Our cryogenic transportation tanks and storage dewars deliver quality as well as liquid cryogens such as liquid nitrogen, liquid natural gas, liquid argon, or liquid oxygen. Ideal for Cryogenic Transportation: All CLD/CHD dewars exhibit a well-thought-out design ...
Manufactured by:Gulf Process Gases, LLC based inHouston, TEXAS (USA)
Cryogenic Gases Storage Tanks: N2, O2, Ar, H2, Co2 Cryo-Storage, Liquefied Natural Gas, Vaporization Units, Liquid Pumps And Pressure Boosters. Gulf Gases can provide your business operations with premium, new or fully-refurbished cryogenic storage vessels. ...
Manufactured by:NEST Biotechnology Co., Ltd. (NEST) based inNew District, CHINA
USP VI Polypropylene; Each tube is permanently marked with a unique 2D barcode, ensuring the tubes can be easily and accurately identified when being moved, shipped or even accidentally ...
Manufactured by:Cryolor based inEnnery , FRANCE
A comprehensive range of horizontal (EFH), vertical (EFV) or high pressure (RHP) vessels for liquefied nitrogen, oxygen & argon, also available for large capacities (TGR). Celine 3TM cryogenic tanks are used for the efficient, safe and long-term storage of cryogenic liquefied gases (liquid nitrogen, oxygen or argon), thanks to their ...
Manufactured by:IC Biomedical, LLC based inCartersville, GEORGIA (US) (USA)
IC Biomedical offers cryogenic transfer equipment designed to meet various specifications with components constructed from durable 300-series stainless steel. This equipment is engineered for optimal performance through advanced vacuum technology and features options for vacuum-jacketed and non-vacuum-jacketed transfer lines with customized lengths. ...