Refine by
Gas Control Equipment & Supplies
47 equipment items found
Manufactured by:Silbermann based inPetah-Tikva, ISRAEL
The SILBERMANN medical gas control panel supplies adjustable pressure, as required, to pneumatic-driven surgical tools in the operating theaters. Silbermann’s gas control panel is designed to meet the latest and most rigid American NFPA99 and European EN ISO 7396-1 ...
Manufactured by:Tri-Techmedical Inc. based inAvon, OHIO (USA)
All gas control panels shall be Tri-Tech Medical, Inc. series and must be installed and tested in strict accordance with NFPA 99 standards and or other local codes before use. The gas control panel shall be factory piped and 100% tested. All components shall be panel mounted on a stainless steel, silk-screened front ...
Manufactured by:Behringer srl based inGenova, ITALY
Copper connection fitting for connecting two high pressure ramps or at the inlet of the decompression panel. The swivel nuts are gas specific threads in accordance with the ...
Manufactured by:Behringer srl based inGenova, ITALY
1st stage compressed gas manifols, medium / high flow rate for medical gases, available both with automatic change - over and manual reset and fully automatic; both versions are available with pressure switch or transducer; consisting of two double-head reduction lines, it guarantees continuity of supply with high stability at the operating pressure of 5 bar; complete with ramp purge valves; very ...
Manufactured by:Behringer srl based inGenova, ITALY
Panel III compressed gas source for medical gases, suitable for installation downstream of the reserve source; equipped with pressure switch and ramp purge valve; composed of a double-head reduction line, it guarantees a continuity of supply with high pressure stability; It is completed by a powder-coated steel plate and a white polycarbonate lid that is light and practical to ...
Manufactured by:Behringer srl based inGenova, ITALY
High flow rate control panel for oxygen, with automatic change-over and available both with reset and automatic; calibrated at 9 bar at the outlet, it reaches a maximum flow rate of 135 mc / h in oxygen in the manual reset version, 110 mc / h in the fully automatic version; it is available with pressure switch or transducer; consisting of two double reduction lines, it guarantees continuous ...
Manufactured by:Behringer srl based inGenova, ITALY
Cylinder connection manifold made with a single brass manifold, with two or three places; specific gas connection; non-return valve built-in in the inlet connection. It is made of materials compatible with the gases and applicable standards in medical gas field. The identification takes place through the indication of the name and/or symbol of the supplied gas and the production batch stamped on ...
Manufactured by:Behringer srl based inGenova, ITALY
Flexible connection made of Ø 8 mm chemically nickel-plated copper pipe, used to make a High Pressure connection between the cylinder and the manifold or control module; the connection nuts are also chemically nickel-plated CW614N brass, with a specific thread for the type of ...
Manufactured by:Behringer srl based inGenova, ITALY
Medium/high flow rate control panel for medicinal gases, available both with automatic change-over and manual reset and fully automatic; both versions are available with pressure switch; consisting of two double reduction lines, it guarantees continuous supply with high pressure stability; complete with manifolf exaust valve; the outlet connector is for a Ø 22 mm welded pipe; its maximum ...
Manufactured by:ACOMA Medical Industry Co., Ltd based inTokyo, JAPAN
To control anesthetic gas control with high precision and reliability. For Sevoflurane and Isoflurane* Capacity : 300 mL. For Halothane type available ...
Manufactured by:Schonn Medizintechnik GmbH based inErkrath, GERMANY
Cylinder manifolds are an important element of gas management in hospitals. They ensure the supply with medical gases and control the gas pressure. The core of the system is the Gas Control Station. The manifold control system shall conform to ISO 7396-1 – Medical gas ...
Manufactured by:Mindray North America based inMahwah, NEW JERSEY (USA)
The A7 Advantage further expands A-Series capabilities with electronic fresh gas control technology to ensure precise flow dynamics. Recycled sample gas reduces the amount of fresh gas and agent used to enhance clinical and cost-saving requirements and Total Flow or Direct Flow settings ensure accurate and responsive anesthesia ...
Manufactured by:Deluxe Scientific Surgico Private Limited based inDelhi, INDIA
Over bed table is with ABS dinning board Metal Base. Height is adjustable, controlled by gas-spring. Four wheels with 5 ...
Manufactured by:Megasan Medical Gas Systems based inÇankiri, TURKEY
Zone control Units provide opening and closure of gas lines, warns when the pressure goes out of set ranges. There are pressure regulators and by-pass system in the unit. Displays an instant pressure value on the LCD screen. Setting option allows you to set pressure range values very easily. Language option is available on the control panel. ...
Manufactured by:G.Samaras S.A. based inThessaloniki, GREECE
Inputs: 5 or 6 analog inputs (transducers), 10/12 digital ...
Manufactured by:HydrUStent SA based inBarco - Guimarães, PORTUGAL
Designed to improve colostomy patient’s quality of life. Its combined three-piece ostomy system allows a controlled gas and body content ...
Manufactured by:Megasan Medical Gas Systems based inÇankiri, TURKEY
Zone control Units provide opening and closure of gas lines, warns when the pressure goes out of set ranges. Displays an instant pressure value on the LCD screen. Setting option allows you to set pressure range values very easily. Language option is available on the control panel. ...
Manufactured by:Zhejiang Healnoc Technology Co., Ltd. based inBinjiang District, CHINA
Maximum flow rate of up to 50 L/min ensures rapid establishment of pneumoperitoneum before surgery. Dual pressure monitoring ensures constant pressure and stable pneumoperitoneum during surgery. ...
Manufactured by:Fisher & Paykel Healthcare Limited based inAuckland, NEW ZEALAND
Proven to consistently perform, Robust. Designed to withstand daily hospital use, Flow sensor technology. Automatic standby during periods of gas flow interruption, Condensation Control and Humidity Compensation. Automatic algorithms designed to reduce mobile circuit ...
Manufactured by:Burtons Medical Equipment Ltd. based inMarden (Kent), UNITED KINGDOM
Fully utilise medical rail systems with this specially designed Burtons anaesthetic machine! Ideal for piped gas systems this medical rail mounted, O2 only, anaesthetic machine is a perfect addition to any practice. The machine is built to last, with a stainless steel frame and Burton's own high-quality components. Supplied as standard with a high accuracy rotameter and emergency O2 flush ...