Refine by
Applications
- Solutions for Pharmaceutical
- Microbial Reduction Solutions for Cosmetic and Packaging
- Brain Interfaces Device for Regaining Control
- Brain Interfaces Device for Reconnecting Thought to Action
- Medical Devices for Moderate to Severe Heart Failure Treatment
- Medical Devices for Severe or Advanced Stage Heart Failure Treatment
- Medical Devices for Causes Heart Failure
- Medical Devices for Heart Failure Symptoms
- Medical Devices for Diagnosis and Evaluation
- Heart Pump for Heart Disease
- VenoValve - Surgically Implanted Valve for Chronic Venous Disease (CVD)
- VenoValve - Surgically Implanted Valve for Chronic Venous Insufficiency (CVI)
- Nucleus Replacement System for Degenerative Disc Disease
Implant Removal Device Equipment & Supplies
159 equipment items found
Manufactured by:PSTEK Co., Ltd based inGunpo-si, SOUTH KOREA
This is a small-capacity induction heating system for an implant removal device, the first technology of its kind that was successfully developed by applying PSTEK’s expertise in the area of induction heating. Our company was requested by RODO, a US dental device company, to jointly develop Smilekey, a small-capacity power ...
Manufactured by:Biomed based inModugno (BA), ITALY
The BIOFELT pledgets present in the soft or hard variants are devices in POLYTETRAFLUOROETHYLENE (PTFE), used for the general reinforcement of the sutures and to support the load on the host tissue, which could otherwise be damaged. The BIOFELT pledgets are sterile, disposable, implantable devices, available in different shapes and sizes and with a soft or hard consistency, to meet the most ...
Manufactured by:Tegra Medical based inFranklin, MASSACHUSETTS (USA)
Highlights: Accurate, repeatable holes with excellent surface finishes. Straightness tolerances of .001” (.025mm) per foot. Concentricity tolerances of .001” (.025mm) per inch. Hole diameter tolerances of +/- .0005” (.0127mm). Finish tolerances as low as 4 Ra. Burr-free intersections. Consistent reproduction from hole to ...
Manufactured by:Pulse Technologies based inQuakertown, PENNSYLVANIA (USA)
Electrodes and microelectrode arrays in most long-term implantable neurostimulation devices demand low impedance for sensing and recording applications, and high charge injection capacity to achieve safe and reversible stimulation. Electrodes with larger geometric surface area perform better, but they take up more space, limit the device’s spatial selectivity and can harm patients. ...
Manufactured by:Aran Biomedical Teoranta based inSpiddal, IRELAND
Aran Biomedical offers substrate micro fine wire for implantable devices. These high-density braids are made from ultra-fine wire and polymers and can be as low as 0.001” (25 micron). This low-profile wire braiding capability enables the production of fabrics with miniscule pore sizes, necessary for next generation braided cardiovascular devices. Materials include Nitinol Wire, and DFT ...
by:Theradaptive based inFrederick, MARYLAND (USA)
With our innovative protein-engineering technology, we transform proteins into material-binding ...
Manufactured by:AK Stamping Company, Inc. based inMountainside, NEW JERSEY (USA)
AK Stamping understands the unique challenges of the medical device market and is equipped to meet them. Our strong engineering and product development capacity, prototyping support, in-house tool build, precision metal stamping capabilities and quality capabilities exceed the demands of our customers, OEM’s and contract manufacturers in the medical market, particularly those who build ...
Manufactured by:Medtimo Inc based inEden Prairie, MINNESOTA (USA)
The ReShape Vest™ is a revolutionary, anatomy-friendly, laparoscopic, implantable device to enable weight loss and stomach preservation. The procedure restricts stomach volume without cutting, stapling, or removing the ...
Manufactured by:LUXILON Industries nv | Medical based inWIJNEGEM, BELGIUM
Luxilon manufactures also materials that can be detected via radiotherapy (e.g. X-ray). The yarns contain BaSO4 which is visible under X-ray. By using these radio-opaque materials it is possible to detect, identify and control an implanted medical device. Luxilon offers radio-opaque monofilament yarns in PP and PET. The polymers used are the same as for Sterimed and Sterilux. The BaSO4 is medical ...
Manufactured by:STC Material Solutions based inSanta Ana, CALIFORNIA (USA)
Feedthroughs for implantable devices are one of the main products STC Material Solutions supplies. STC Material Solutions played a key role in developing customized feedthroughs for medical implants. All medical feedthroughs are designed and manufactured using only biocompatible materials. Our engineering team has years of expertise in material selection. This ensures our feedthroughs are not ...
Manufactured by:PolymerExpert based inPESSAC, FRANCE
ExpertShape, memory shape polymer. Functional principle of shape memory polymers The principle is based on the change of shape of a material due to temperature. To do this, the polymer is “programmed” in a first step. It is molded into an “initial” shape, then mechanically deformed under heat (T > Tg) until the desired secondary shape is obtained. Then, while ...
Manufactured by:Neuspera Medical, Inc. based inSan Jose, CALIFORNIA (USA)
The Neuspera micro-implant has a modular construction, enabling adaptation for a variety of neural interfaces. The device has an array of programmable stimulation parameters, including frequency, pulse width, and amplitude (voltage) for current control, allowing for maximum flexibility in addressing common neurostimulation applications. Hermetically sealed and made of standard materials, the ...
Manufactured by:Neuspera Medical, Inc. based inSan Jose, CALIFORNIA (USA)
Neuspera’s patented Mid-Field Powering technology uses evanescent and propagating electromagnetic waves to power implanted medical devices to depths of 10cm and beyond. Using the body as a natural waveguide, the Neuspera system can focus power, ensuring energy is delivered to the precise area it is needed. Leveraging efficient power transfer, the power receiver is less than a few ...
Manufactured by:Vulkam based inGières, FRANCE
Product line dedicated to highly stressed parts of medical devices such as dental & chirurgical implants: Implantable devices for dentistry, orthopedics, highly mechanically stressed instrumentation, motorized instrument ...
by:V-Wave Ltd. based inCaesarea Industrial Park (N), ISRAEL
The V-Wave Ventura Interatrial Shunt is a novel, hourglass-shaped implantable device. The shunt is designed to enable shunting of blood across the interatrial ...
Manufactured by:Sight Sciences, Inc. based inMenlo Park, CALIFORNIA (USA)
OMNI® Surgical System – an implant free device that targets outflow resistance. For surgeons, the OMNI® Surgical System is a novel, implant-free MIGS device which can be used in combination with cataract surgery or in a standalone procedure to lower IOP in adult patients with Primary Open Angle ...
Manufactured by:Aran Biomedical Teoranta based inSpiddal, IRELAND
Hydrophilic coatings are used by Aran Biomedical to create a lubricious surface for implantable devices. The principle benefit of a lubricious coating is to substantially reduce surface friction, facilitating implant delivery and deployment, while additional benefits may be recognised in-vivo, such as reduced potential for tissue damage, lower bacterial adherence or biofilm formation. ...
Manufactured by:Deringer-Ney Inc. based inBloomfield, CONNECTICUT (USA)
Separable connectors that require a high level of performance in adverse environments rely on Deringer-Ney materials and manufacturing. Pin-and-socket, pin-on-flat, and cantilever beam are the most common connector configurations for us. These can be found in specialty cable and plug connections for aerospace, defense, medical, and adverse industrial environments. Our contacts offer durability ...
Manufactured by:Centric Medical, LLC based inHuntley, ILLINOIS (USA)
The ROGUE Hammertoe Correction System offers a dual threaded design and is inserted between the proximal and middle phalanges, so that the opposing threads fixate on the phalangeal canal of the toe and compress the ...
Manufactured by:S3 Connected Health based inDublin, IRELAND
Our team understand the challenges scale-up medtech companies face when commercializing a medical device; we’ve taken many clients successfully through development and we can do the same for you. Using certified tools and processes, our experts will address performance and regulatory gaps and efficiently turn your prototype into a marketable product. ...