Refine by
Implantable Equipment Supplied In Italy
73 equipment items found
Manufactured by:BIOCAD based inRome, ITALY
BIOCAD designs and implements custom made cranioplasty prostheses, for the reconstruction of extended cranial defects.Thanks to the exclusive software and technologies,BIOCAD provides a valuable support to the Neurosurgeon, and guarantees to the patient the perfect reconstruction of the lost bone profile. ...
Distributed by:Vacuum Service based inRoma, ITALY
Solviva is a family of biomaterials offered for use in implantable medical devices. Only products designated as part of the Solviva family of biomaterials may be considered as candidates for medical applications implanted in the human body and devices that are in contact with bodily fluids or tissues for greater than 24 ...
by:SI-BONE, Inc. based inSanta Clara, CALIFORNIA (USA)
Minimally invasive SI joint surgery is the current medical standard of care for SI joint fusion to relieve sacroiliac joint pain. The iFuse Implant System®, available since 2009, is a minimally invasive surgical (MIS) option designed to provide immediate sacroiliac (SI) joint stabilization and allow long-term ...
Manufactured by:Vigeo srl based inBagnolo San Vito, ITALY
Used to target localization for lesions or organs which move in respect to external anatomy. Pure gold cylinders version specially knurled to inhibit migration. Pyrolytic carbon coated zirconium oxide bar-bell version to reduce the artifacts. Provide visualization under fluoroscopy, X-ray, CT, MRI, ultrasound and other imaging modalities. Preloaded in a pre-waxed tipped needle or in a wax- free ...
Manufactured by:Vigeo srl based inBagnolo San Vito, ITALY
Bar-bell shaped pyrolytic carbon coated ceramic with exceptionally biocompatibility with clear imaging characteristics. Unique shapes designed to prevent migration. No allergy response or hypersensitivity reported. Designed for safe, reliable, and precise placement during core biopsies. Permanent and clear visibility with mammography, ultrasound and MRI. No interference with MRI visualization, ...
Manufactured by:Mectron Dental based inCarasco, ITALY
The REX PiezoImplant TL 1.8 H 13 it'a a preassembly implant, minimally invasive, resolves edentulies with horizontal defect. This implant is 5 mm wide and is available in three different heights: 9, 11 and 15 mm. ...
Manufactured by:Mectron Dental based inCarasco, ITALY
The REX PiezoImplant TL 1.8 H 11 it'a a preassembly implant, minimally invasive, resolves edentulies with horizontal defect. This implant is 5 mm wide and is available in three different heights: 9, 13 and 15 mm. ...
Manufactured by:Mectron Dental based inCarasco, ITALY
The REX PiezoImplant TL 1.8 H 9 it'a a preassembly implant, minimally invasive, resolves edentulies with horizontal defect. This implant has a width of 5 mm and is available in three others different heights: 11, 13 and 15 mm. ...
Manufactured by:Medical Instruments Spa based inSan Lazzaro di Savena, ITALY
The Snake Suture Organizer saves time during valve implantation by keeping the suture – ends organized and tangle free. ...
Manufactured by:Hofer GmbH & Co KG based inFürstenfeld, AUSTRALIA
The intramedullary HCP from Hofer Medical Solutions is characterized by the simple implantation technique and maximum stability. ...
Manufactured by:Biomed based inModugno (BA), ITALY
The BIOFELT pledgets present in the soft or hard variants are devices in POLYTETRAFLUOROETHYLENE (PTFE), used for the general reinforcement of the sutures and to support the load on the host tissue, which could otherwise be damaged. The BIOFELT pledgets are sterile, disposable, implantable devices, available in different shapes and sizes and with a soft or hard consistency, ...
Manufactured by:Know Medical Srl based inViadana, ITALY
The Huber needles have different lengths depending on the application or the final choice of the doctor according to the type of implanted port or on the patient. Needles of 15mm: thin patients and/or low-profile port; Needles of 20mm: patients of standard size and/or standard and low-profile port; Needles of 25mm or more: for overweight patients and/or standard port or higher ...
Manufactured by:Herniamesh S.r.l. based inChivasso (TO), ITALY
Rigid, flat oval meshes, indicated for the repair of ventral hernias with the open technique. These meshes can be implanted using Trabucco’s “tension-free, sutureless” ...
Manufactured by:Intrauma S.p.a. based inRivoli (To), ITALY
The Kit provides high quality single-use implants and instruments designed to improve the efficiency of your operating theater. It is streamlined to promote procedural efficiency by simplifying the management of instruments and implants during the surgical procedure. The innovative instrumentation is single-use and allows you to maintain the same surgical routine ...
Manufactured by:Intrauma S.p.a. based inRivoli (To), ITALY
The Kit provides high quality single-use implants and instruments designed to improve the efficiency of your operating theater. It is streamlined to promote procedural efficiency by simplifying the management of instruments and implants during the surgical procedure. The innovative instrumentation is single-use and allows you to maintain the same surgical routine ...
Manufactured by:Intrauma S.p.a. based inRivoli (To), ITALY
Delayed union, pseudo-arthrosis, breakage of fixation devices and asymmetrical bone callus formation are often caused by the rigidity of the implants, which do not allow proper load transfer to the ...
Manufactured by:MEDICO S.R.L. based inRubano (PD), ITALY
It is a 3-chamber pacing system analyzer (PSA), which can manage the TVI signal at the ...
Manufactured by:Tecno-Gaz S.p.A. based inParma, ITALY
Ideal for the most productive laboratories that require maximum precision in detail. Not only for daily work but also for scanning models for implant ...
Manufactured by:SpineVision based inAntony, FRANCE
The FLEX +2 system is an innovative sterile rod designed for degenerative lumbar dynamic stabilization or topping off assembly. The FLEX +2 is a dynamic device to be implantable whether during a percutaneous approach or open surgeries. ...
Manufactured by:Permedica S.p.A. based inMerate (LC), ITALY
In the cemented version the surface in contact with the bone of the femoral and tibial components has depressions for an even distribution of the cement mantle and an optimal distribution of the loads, giving stability to the implant. In the cementless version, the surface in contact with the bone with HaX-Pore® coating (300μm pure titanium + 50μm Hydroxyapatite plasma ...