- Home
- Equipment
- north america
- compression fitting
Refine by
Compression Fitting Equipment Supplied In North America
9 equipment items found
Manufactured by:Brasseler USA based inSavannah, GEORGIA (US) (USA)
This design is comparable to the V Taper™ 2 file, previously sold by SS White. Minor design upgrades include a short 16mm compression-fit nickel handle and a more robust stopper. These heat-treated NiTi files are extremely resistant to cyclic fatigue and are preferred by clinicians that embrace a minimally invasive shaping philosophy. ...
Manufactured by:Hemedex, Inc. based inWaltham, MASSACHUSETTS (USA)
#H0000-3642) provides a bolt that secures the minimally invasive QFlow 500 Perfusion Probe and one other sensor through a burr hole in the cranium. The kit includes compression fittings, sealing caps, a stylet, a sensor introducer, a 5.3mm drill bit with depth collar, a hex wrench, a scalpel, a pigtail extension, and a male-female luer coupler. This is the ...
Manufactured by:Hemedex, Inc. based inWaltham, MASSACHUSETTS (USA)
#H0000-3644) provides a bolt that individually secures the QFlow 500 Perfusion Probe and three other sensors through one small burr hole in the cranium enabling monitoring of up to 6 intracranial parameters (ICP, PbtO2, Perfusion, Temperature, IEEG, Microdialysis). The kit includes a 5.3mm drill bit, depth collar, hex wrench, compression fittings, sealing caps, ...
Manufactured by:Conax Technologies based inBuffalo, NEW YORK (USA)
This assembly consists of a Conax Technologies manufactured TG Feedthrough provided with a sealant and 24 AWG solid insulated thermocouple grade wires or copper wires. The feedthrough is furnished with 24″ of wire on each side. Longer wire lengths can be furnished as ...
Manufactured by:Bryan Medical based inCincinnati, OHIO (USA)
Soft, thin-walled PVC tube. Does not contain DEHP. Flange has a sloping undersurface to optimize the ...
Manufactured by:Bryan Medical based inCincinnati, OHIO (USA)
Soft, flexible, spiral-reinforced silicone tube. Available with and without cuff. Embedded cuff inflation line aids tube ...
Manufactured by:Conax Technologies based inBuffalo, NEW YORK (USA)
Features: Pressure/Vacuum Compression Seal. Stainless Steel Reusable Fitting. “Soft Sealant”. Wires Easily Assembled or Replaced In Field. Temperature Range From -300°F to +1600°F (-185°C to +870°C). Pressure*: Vacuum to 10,000 PSI (690 bar). ...
Manufactured by:Michigan Instruments, Inc. based inGrand Rapids, MICHIGAN (USA)
Known as The Thumper, Model 1007CC is a mechanical CPR device designed to deliver continuous chest compressions to a patient in a state of acute cardiac arrest. Light-weight and easy to use, the transition from manual CPR can be done with minimal interruption to compressions. Read on to learn more about the absolute best value in Automated CPR available ...
by:CyMedica Orthopedics, Inc. based inTempe, ARIZONA (USA)
The QB1 system gives patients the power to overcome quad weakness by integrating next-generation muscle activation technology in a simple compressive wrap or post-operative brace. It uses an integrated, handheld controller to enable patients to treat muscle atrophy from home. ...