Refine by
Applications For The Served Electronics And Computers Industry Available In Japan
102 applications found
Premium
Anguil’s portfolio of innovative, competitive solutions for this rapidly evolving industry provide guaranteed VOC destruction, reduced equipment footprint, and maximized production uptime and ...
ByAnguil Environmental Systems, Inc. based in  Milwaukee, WISCONSIN (USA)
Premium
Contamination of circuit boards can bring about severe degradation of insulation resistance and dielectric strength. Cleanliness of completed circuit boards is, therefore, of vital interest. For those companies who have established circuit board cleaning procedures, the MIL Spec P-28809 has been used as a guideline for control. Now a simple 'on line' test for the relative measurement of ionic contamination has been developed. This fast and economical method for testing circuit board cleanliness uses a Myron L ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
Inspection and process control for maintaining quality assurance over PCB artwork and bare-boards represent especially challenging requirements for metrology systems. Artwork inspection requires precise measurement of critical features such as the positions of leads and pads, while bare-board inspection also involves accurate assessment of hole locations, size, trace widths, board length, width, and warpage. In addition to requiring consistent measurement accuracy over relatively large areas of travel, bare-boards ...
ByVIEW Micro Metrology based in  Rochester, NEW YORK (USA)
Premium
The RoHS directive stipulates maximum limits for various hazardous substances in electrical and electronic equipment. Meeting the RoHS Directive requires reliable equipment and methods. As a leading manufacturer of precision instruments for chemical analysis, we are aware of these challenges. For this reason, Metrohm offers you not only the most advanced equipment, but rather complete solutions for the particular tasks at ...
ByMetrohm AG based in  Herisau, SWITZERLAND
Premium
NOx detection is an innovative approach in CMP (Chemical Mechanical Polishing) process control. CMP smoothens the wafer surface with a combined chemical and mechanical polishing procedure. During production, wafers are coated by a thin layer. To avoid damage to the wafer surface, for instance by stress cracks, the NOx emitted as soon as the wafer is plane and blank must be measured. Therefore, a high-resolution NOx-detector, capable of determining exactly when the polishing process must be stopped, is essential. ...
ByECO Physics AG based in  Duernten, SWITZERLAND
Premium
Processing electronic scrap (E-Scrap or WEEE) presents special challenges. Computers, consumer electronics, and IT equipment need to be destroyed to extract recyclables or ensure the security and complete destruction of the product. Hard drives, tapes and data storage devices must be completely destroyed to provide data security. And, while many electronic scrap items do not require the specific size reduction that hard drives or other data storage devices require, all electronic scrap includes recoverable ...
ByGranutech-Saturn Systems based in  Grand Prairie, TEXAS (USA)
Premium
In the electronics industry, pure water and ultrapure water with a very high degree of purity and functional water that dissolve gases into ultrapure water are used to clean silicon wafers and electronic components. Kurita Water Industries offers a range of products such as deionizers and ultrapure water deionizers that combine RO (reverse osmosis) membrane water treatment chemicals, ion-exchange resins, and continuously regenerating-type deionizers , etc., as well as functional water production systems . Kurita ...
ByKurita Water Industries Ltd based in  Tokyo, JAPAN
Premium
Micro-electronics industry is probably the fastest growing industry driven mainly by the expansion of the computer and telecommunications markets, as well as the growing automotive, military and industrial electronic markets. The production of smaller and smaller microelectronic components is contributing for a great pressure for the purification of process waters, given the extreme high quality water demanded by the manufacturers Lenntech provides complete solutions for ultra pure water production for ...
ByLenntech Water Treatment based in  Delfgauw, NETHERLANDS
Premium
Driven by consumer demands for faster, lighter, and more capable mobile devices, consumer electronics manufacturers and component suppliers are faced with the challenge of keeping pace with constant evolution of technology, shorter product life cycles, and increased ...
ByZygo Corporation - AMETEK, Inc based in  Middlefield, CONNECTICUT (USA)
Premium
Solder reflow ovens play a vital role in the thriving electronics industry, facilitating large-scale production of printed circuit boards. These innovative ovens enable the attachment of electrical components to their contact pads on a PCB by applying solder paste. Through a controlled heating process, the solder paste melts, creating durable solder joints that ensure reliable connections. ...
ByCambridge Sensotec Limited based in  St. Ives, UNITED KINGDOM
Premium
Micro-electromechanical systems, or MEMS, have become critical components in a variety of consumer and industrial products, including things inkjet printers, cellular phones and accelerometers for automobile airbags. MEMS devices are typically manufactured in high volumes, often using modified semiconductor processes, to exacting specifications. For MEMS manufacturers to meet high production standards, these devices need to be measured at various steps of the design, fabrication and production ...
ByZygo Corporation - AMETEK, Inc based in  Middlefield, CONNECTICUT (USA)
Bearing solution for electronic ...
ByXiamen Obee Transmission Technology Co., Ltd. based in  Xiamen, CHINA
ByMunters based in  Amesbury, MASSACHUSETTS (USA)
Enable advanced plasma processes control via highly accurate power delivery, frequency tuning, and multi-level pulsing. To manufacture leading-edge integrated circuits (ICs), new processes and materials are deployed for transistor or memory cell creation. Declining feature size and atomic-level precision make extreme process control essential. And new device architectures (3D-NAND and Fin FETs) drive multi-patterning (double and quadruple) demand — making innovative etch and deposition processes ...
ByAdvanced Energy Industries, Inc. based in  Denver, COLORADO (USA)
FHT products and technology provides advanced coating, cleaning and mixing in the semiconductor ...
ByFluidic High Technology (FHT) based in  Wayne, NEW JERSEY (USA)
A printed circuit board (PCB) is the board base for physically supporting electronic components and the provider of circuit connections for electronic components. According to the circuit design, the electrical wiring connecting the electronic components is drawn into a graphic, and then the circuit board is made into a circuit board by the mechanical processing and surface treatment specified by the design, so as to achieve the purpose of signal transmission and ...
ByKung Hai Enterprise Corp. - PTCXPUMP based in  Kaohsiung City, TAIWAN
Actually in the plant the generator, compressor, gas turbines are all on a single shaft. I have a doubt that if we are using static frequency converter then we can start with giving low frequency to the stator... and if the frequency is low then can magnetic locking between stator and rotor can take place directly (without excitation) and after that we can increase the frequency to stator & after reaching say 75% speed the turbine will be self-sustaining and the static frequency converter supply can be cut off ...
ByFrequency Converter based in  Chicago, ILLINOIS (USA)
High-resolution conductive traces can be formed on polymers, glass, ceramics, and other dielectric materials. Trace width can go below 5 µm. With a patented SSAIL technology conductive traces can be formed on many standard dielectric materials (polymers, ceramics, glass, silicon). It enables tighter electronics packaging on flat or 3D surfaces (with traces down to 1 µm width), making antennas directly on/in parts and creating functional ...
ByAKONEER based in  Vilnius, LITHUANIA
The electronics industry creates technology from cell phones to the heart monitors, and these systems rely on high-quality microchips to operate. Within manufacturing, water is used to rinse the microchips. However, water contains salt impurities that carry electrical currents and if the water is not treated to remove these salts, then our favorite technology devices can be compromised. Resins are used to make extremely high purity water used for rinsing of the microchips during the production process, providing ...
BySuzhou X Chemical Co.,Ltd based in  Suzhou City, CHINA
The sensitivity of the AttoMap microXRF enables quantitative analysis of trace levels of dopants in FinFETS and has demonstrated down to 2 nm thickness of high-k dielectric films at 1% repeatability. Acquisition is non-destructive and can be performed within seconds. Ultimate sensitivity for dopants such as Ni, La, Hf, etc. ...
BySigray, Inc based in  concord, CALIFORNIA (USA)