Refine by
Medical Equipment Control Equipment & Supplies
12 equipment items found
Manufactured by:Behringer srl based inGenova, ITALY
Copper connection fitting for connecting two high pressure ramps or at the inlet of the decompression panel. The swivel nuts are gas specific threads in accordance with the ...
Manufactured by:Behringer srl based inGenova, ITALY
Cylinder connection manifold made with a single brass manifold, with two or three places; specific gas connection; non-return valve built-in in the inlet connection. It is made of materials compatible with the gases and applicable standards in medical gas field. The identification takes place through the indication of the name and/or symbol of the supplied gas and the production batch stamped on ...
Manufactured by:Behringer srl based inGenova, ITALY
Flexible connection made of Ø 8 mm chemically nickel-plated copper pipe, used to make a High Pressure connection between the cylinder and the manifold or control module; the connection nuts are also chemically nickel-plated CW614N brass, with a specific thread for the type of ...
Manufactured by:Behringer srl based inGenova, ITALY
Medium/high flow rate control panel for medicinal gases, available both with automatic change-over and manual reset and fully automatic; both versions are available with pressure switch; consisting of two double reduction lines, it guarantees continuous supply with high pressure stability; complete with manifolf exaust valve; the outlet connector is for a Ø 22 mm welded pipe; its maximum ...
Manufactured by:Behringer srl based inGenova, ITALY
1st stage compressed gas manifols, medium / high flow rate for medical gases, available both with automatic change - over and manual reset and fully automatic; both versions are available with pressure switch or transducer; consisting of two double-head reduction lines, it guarantees continuity of supply with high stability at the operating pressure of 5 bar; complete with ramp purge valves; very ...
Manufactured by:Behringer srl based inGenova, ITALY
Panel III compressed gas source for medical gases, suitable for installation downstream of the reserve source; equipped with pressure switch and ramp purge valve; composed of a double-head reduction line, it guarantees a continuity of supply with high pressure stability; It is completed by a powder-coated steel plate and a white polycarbonate lid that is light and practical to ...
Manufactured by:Behringer srl based inGenova, ITALY
High flow rate control panel for oxygen, with automatic change-over and available both with reset and automatic; calibrated at 9 bar at the outlet, it reaches a maximum flow rate of 135 mc / h in oxygen in the manual reset version, 110 mc / h in the fully automatic version; it is available with pressure switch or transducer; consisting of two double reduction lines, it guarantees continuous ...
Manufactured by:Zhejiang Zhongxin New Energy Technology Co., Ltd. based inHaiyan County, CHINA
Main Features: Improved ZX138 relay by magnetic arc blowout. Up to 45A Switching capacity. PCB+Quick Connect ...
Manufactured by:BeStar Sensortech Co., Ltd. based inChang Zhou Shi, CHINA
Single Layer Single-Sided Piezo Ceramic Element is a very crucial applicant operating in a wide variety of consumer electronics, industrial control, medical equipment, IoT based acoustic devices and modules. This component works on the principle of piezoelectric and converts electrical input to accurate mechanical vibration to produce sound or ...
Manufactured by:BeStar Sensortech Co., Ltd. based inChang Zhou Shi, CHINA
Haptic component, the BMV1818L28 Ultra-Low Frequency Linear Motor Dynamic Exciter, provides a solution to challenges faced with creating surfaces that are capable of controlled vibrations on solid conditions, i.e., wood, glass, or metal surfaces with an auxiliary application directly on the structure to produce controlled mechanical oscillations. Unlike standard speakers or vibration modules, it ...
Manufactured by:Maike Magnetics Co.,Ltd based inMianyang City, CHINA
Common mode chokes, or common mode inductors, consist of two or more coils of insulated wire on a single magnetic core. Each winding is put in series with one of the conductors. This means that the magnetic fields of the wires combine to present high impedance to the noise signal. ...
Manufactured by:BeStar Sensortech Co., Ltd. based inChang Zhou Shi, CHINA
The Single Layer Piezoelectrics BSU-P15-1000B-W065 are the active driving elements used in piezoelectric liquid pumps that allow very efficient and accurate actuation to achieve a fluid flow based on electrical signals that are converted into controlled mechanical motions. Such technology relies on the tunable nature of piezoelectric phenomena to achieve high frequency, repeatable displacements ...