- Home
- Equipment
- united kingdom
- intraocular lenses iols
Refine by
Intraocular Lenses Iols Equipment Supplied In United Kingdom
18 equipment items found
Manufactured by:Lenstec, Inc. based inSt Petersburg, FLORIDA (USA)
Zero spherical aberration. A patented HD optic design. Low dysphotopsia. A very small defocus, which translates to a sharper image along the optical axis of the lens and improves contrast and visual acuity (based on Through-Focus ...
Manufactured by:Lenstec, Inc. based inSt Petersburg, FLORIDA (USA)
All of our lenses are produced with 1:1 Anterior-to-Posterior Curvature Ratio. This ‘Equiconvex’ design permits the thinnest possible lenses, which will provide outstanding optical imaging with less spherical aberration than conventional IOLs. The lens styles are all produced with step-vaulted haptics. With this design technique the haptic is initially angulated upward then flattened. ...
Manufactured by:Rayner Intraocular Lenses Limited based inWest Sussex, UNITED KINGDOM
Fully preloaded with Rayner’s clinically superior 600C aspheric lens, RayOne is the world’s smallest incision fully preloaded injector. RayOne Aspheric (RAO600C) offers surgeons a 2.2 mm incision and two-step preparation system to deliver a monofocal with less PCO, less decentration, and a higher Abbe value to ensure reliably superior patient outcomes time after time. RAO600C is ...
Manufactured by:Lenstec, Inc. based inSt Petersburg, FLORIDA (USA)
Three-piece lens; Patented bi-aspheric design; Equiconvex optic (+1.0D to +36.0D), Meniscus (-5.0D to 0.0D); Full-angulated lens gives it more reliable posterior ...
Manufactured by:Rayner Intraocular Lenses Limited based inWest Sussex, UNITED KINGDOM
Fully preloaded with Rayner’s clinically superior 100C spheric lens, RayOne is the world’s smallest incision fully preloaded injector. RayOne Spheric (RAO100C) offers surgeons a sub 2.2 mm incision and two-step preparation system to deliver a monofocal with less PCO, less decentration, and a higher Abbe value to ensure reliably superior patient outcomes time after time. RAO100C is ...
Manufactured by:Rayner Intraocular Lenses Limited based inWest Sussex, UNITED KINGDOM
Rayner Sulcoflex: An elegant solution for treating refractive surprise. Rayner Sulcoflex Aspheric Pseudophakic Supplementary IOLs are designed to be implanted in the ciliary sulcus to correct residual post-operative refractive errors following the implantation of a conventional IOL in the capsular ...
Manufactured by:Rayner Intraocular Lenses Limited based inWest Sussex, UNITED KINGDOM
RayOne EMV, a new fully preloaded non-diffractive IOL, was designed in collaboration with world renowned surgeon, Professor Graham Barrett. RayOne EMV offers reduced dysphotopsia compared to diffractive IOL designs. This is achieved through a unique aspheric anterior surface which adds to the positive spherical aberration (SA) of the cornea in a controlled manner. This positive SA smoothly ...
Manufactured by:Lenstec, Inc. based inSt Petersburg, FLORIDA (USA)
The Lenstec SBL-2 Segmented Bifocal Lens is a presbyopic lens that is intended to provide superior HD vision. It is a asymmetric segmented multifocal IOL (MIOL) that is designed to improve contrast sensitivity, minimize halos and glare, and provide superior near, intermediate and distance vision compared to other presbyopic ...
Manufactured by:Rayner Intraocular Lenses Limited based inWest Sussex, UNITED KINGDOM
High quality natural vision. Developed in collaboration with world renowned surgeon, Professor Graham Barrett, RayOne EMV Toric is a highly versatile lens that meets the visual needs of a large population of cataract and refractive patients3 looking for greater spectacle independence than offered by standard monofocal ...
Manufactured by:Lenstec, Inc. based inSt Petersburg, FLORIDA (USA)
The Softec I is a C-loop, one-piece hydrophilic acrylic with a uniplanar design and equal biconvex spherical optic that allows surgeons to implant the lens whether it is right-side up or not. This makes positioning the lens virtually fool proof. The Softec I has been available globally for more than 10 years. It is part of Lenstec’s line of high value ...
Manufactured by:Lenstec, Inc. based inSt Petersburg, FLORIDA (USA)
This lens is currently in a US FDA-approved clinical trial. The Lenstec SBL-3 Segmented Bifocal Lens is a presbyopic lens that is intended to provide superior HD vision. It is a asymmetric segmented multifocal IOL (MIOL) that is designed to improve contrast sensitivity, minimize halos and glare, and provide superior near, intermediate and distance vision compared to other presbyopic ...
Manufactured by:Rayner Intraocular Lenses Limited based inWest Sussex, UNITED KINGDOM
Built on the clinically-proven Rayner primary IOL platform, the 600C Aspheric is a hydrophilic acrylic aspheric monofocal IOL with our Amon-Apple 360° enhanced square edge. Now FDA Approved in the USA, Rayner’s global lens design offers surgeons a sub-2.2 mm incision IOL for minimal wound damage and surgically-induced astigmatism (SIA). We believe that every patient’s vision is ...
Manufactured by:Lenstec, Inc. based inSt Petersburg, FLORIDA (USA)
Designed To Be The Worlds Most Accurate Bi-Aspheric IOL. IOL implantations are one of the most successful global surgical procedures, with an estimated 12 to 15 million IOLs inserted each year. This number is projected to grow considerably over the next 20 years due to the aging population and, most importantly, patient demand for higher quality ...
Manufactured by:Rayner Intraocular Lenses Limited based inWest Sussex, UNITED KINGDOM
RaySert PLUS is a Rayner designed and manufactured single-use injector, for implantation of the C-flex Aspheric IOLs through a 2.2 mm wound assisted clear cornea ...
Manufactured by:Lenstec, Inc. based inSt Petersburg, FLORIDA (USA)
Lenstec now has another lens designed to address spherical aberration and defocus, and accommodates a sub-2.2mm incision size. IOL implantations are one of the most successful global surgical procedures, with an estimated 12 to 15 million IOLs inserted each year. This number is projected to grow considerably over the next 20 years due to the aging population and, most importantly, patient demand ...
Manufactured by:Lenstec, Inc. based inSt Petersburg, FLORIDA (USA)
The most progressive cataract surgeons provide their patients with the best restoration of vision with higher technology implants. This is accomplished by matching the patient’s lifestyle and vision needs to the implant technology available. Lenstec is proud of our Lifestyle Vision technology available through the TetraflexHD implant. If you are an active senior adult with vision lifestyle ...
Manufactured by:Takagi Ophthalmic Instruments Europe Ltd. based inManchester, UNITED KINGDOM
The CGT-2000 detects even the subtle changes in visual function that would be missed by visual acuity tests. The CGT-1000, which had been well received by many practices and medical facilities including university hospitals, has evolved into an advanced model, the CGT-2000 incorporating various customers’ feedback. The CGT-2000 is particularly useful and effective in pre-/post-cataract ...
Manufactured by:Carl Zeiss Meditec AG based inJena, GERMANY
In order for any practice to run smoothly, routine assessments must be easy to perform. As part of the daily pretest workflow, the refraction assessment is no exception. Maintaining a high patient throughput in this area is key to the success of every eye care ...